Wireless Access Control - D-Link DSL-2745 User Manual

Section 4 - Configuration
The Wireless Access Control setup section enables you to configure MAC
Address filters to control which wireless clients can or cannot connect to your
network.
WIRELESS ACCESS CONTROL MODE
Wireless Access Select Allow Listed, Deny Listed, or Disable.
Control Mode:
Click Apply Changes when you are done.
WIRELESS ACCESS CONTROL SETTINGS
MAC Address: Enter the MAC address of the device you wish to add to the current
access control list.
Click Add to add a device to the access control list or click Reset to clear the
MAC address.
CURRENT ACCESS CONTROL LIST
This list currently displays the MAC addresses of the devices being filtered. To remove a
device from the list, select the radio button next to the MAC address and click the Delete
Selected button. To remove all the entries from the list, click Delete All.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual

Wireless Access Control

63