D-Link DSL-2740B Configuration Manual

Web filtering wireless n

Hide thumbs Also See for DSL-2740B:

Web Filtering

This document will detail how to configure Web Filtering on the following models

DSL-2730B Revision T1 Firmware AU_2.00

DSL-2740B Revision F1 Firmware AU_2.00

DSL-2750B Revision B1 Firmware AU_2.00

NOTE:

The Web Filter feature cannot be configured to block websites to specific computers.

All computers on the network will be affected by the filter.

Support – How to configure Web Filtering.

D-Link Technical

Page 1 of 4

Table of Contents

Do you have a question about the DSL-2740B and is the answer not in the manual?

Page 1: Web Filtering
Web Filtering This document will detail how to configure Web Filtering on the following models DSL-2730B Revision T1 Firmware AU_2.00 DSL-2740B Revision F1 Firmware AU_2.00 DSL-2750B Revision B1 Firmware AU_2.00 NOTE: The Web Filter feature cannot be configured to block websites to specific computers.
Page 2 1. Log in to the modem with the computer connected to the modem via Ethernet. URL: http://192.168.1.1 (default) Username: admin Password: admin (default) 2. Select the ADVANCED button in the top menu. Support – How to configure Web Filtering. D-Link Technical Page 2 of 4...
Page 3 3. Select PARENTAL CONTROL in the left menu, followed by the Block Website button. 4. Click ADD to create a new filter rule. Support – How to configure Web Filtering. D-Link Technical Page 3 of 4...
Page 4 Select Manual Schedule to create a new schedule in which the site will be blocked. 6. Once all information is set, click on APPLY to save the changes and verify whether the sites are being blocked. Support – How to configure Web Filtering. D-Link Technical Page 4 of 4...

Dsl-2750b Dsl-2730b