Table of Contents
Advertisement
Section 4 - Configuration
Idle Time (min):
If you selected Connect on Demand, enter the amount the router
waits if there is no activity before disconnecting from the Internet.
WAN IP Settings:
If IPv4 or IPv4/IPv6 is selected, these settings are disabled. The
router will use DHCP only, Fixed (Static IP) is unavailable.
Configure the IPv6 WAN settings. If the IP Protocol is set to IPv4,
IPv6 WAN
Settings:
these settings are unavailable.
Select either Slaac or Static.
Address Mode:
IPv6 Address:
Enter your IPv6 Static Address. Only available in Static mode.
IPv6 Gateway:
Enter your IPv6 Gateway. Only available in Static mode.
Select either Auto, Enable, or Disable.
DHCPv6 Mode:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
Address:
Enable or Auto:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
PD:
Enable.
Click Add to create your connection.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
PPPoA Mode (continued)
32
Hide quick links:
Advertisement
Table of Contents
