Wireless Basics - D-Link DSL-2745 User Manual

Section 4 - Configuration
This page allows you to manually configure the router's wireless connectivity
settings. To change your wireless network security settings refer to Wireless
Security on page 49.
WIRELESS NETWORK SETTINGS
Disable Wireless
Check this box to disable the Wireless functionality of this device.
LAN Interface:
Band:
Select the wireless standards to use on your wireless network. The
options are 2.4 GHz (B), 2.4 GHz (G), 2.4 GHz (B+G), 2.4 GHz (N),
2.4 GHz (N+G), or 2.4 GHz (N+G+B).
Mode:
The DSL-2745 operates in AP mode by default.
SSID:
Enter a unique Network Name (SSID) to identify your network.
Channel Number:
Select the channel number for your wireless network to operate
on. Choose 1-13, or Auto. The default is Auto.
Radio Power Choose the wireless transmission power strength. The options are
(Percent): 100%, 60%, or 20%. The default is 100%.
Associated Click this button to see a list of the currently connected wireless
Clients: clients.
Channel Width: Choose the transmission channel bandwidth. The options are 20
MHz or 20/40 MHz.
Click Apply Changes to have your changes take effect.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual

Wireless Basics

48