Ip Qos - D-Link DSL-2745 User Manual

Section 4 - Configuration

IP QoS

From this page you can configure the Quality of Service settings on your
DSL-2745 to help improve your browsing experience. Setting up QoS requires
familiarity with networking technology outside the scope of this document,
as well as an understanding of the traffic on your network.
IP QOS CONFIGURATION
Click the radio button to enable or disable IP QoS. If enabled, choose whether to use
WFQ(4:3:2:1) or strict prior.
Click Apply Changes to begin using QoS.
QOS RULE LIST & QOS RULE LIST(CONTINUTE)
The table shows the current QoS rules currently in effect.
Click Add Rule to add a rule. To modify a rule, select it from the table. The Add or Modify
QoS Rule box will appear and the fields will populate with the rule credentials. To delete a
rule, select it from the list and click Delete Rule.
ADD OR MODIFY QOS RULE
Enter the criteria for your QoS rule.
Click Apply Changes to add your rule to the QoS rule list.
D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual 93