Optional Air Mate Installation; Positioning The Stove - Enerzone Solution 2.9 Manual

2.1.4 Optional air mate installation

Most freestanding Enerzone wood stoves can be equipped with an optional air mate. This device
accumulates heat and increases the airflow. See below for installation instructions:
1- Remove the 3 screws holding the rear eat shield deflector.
2- Position the air mate on top of the stove and fix it in place using the 3 screws removed in
step #1.

2.2 POSITIONING THE STOVE

It is very important to position the wood stove in an area that will favour the most efficient heat
distribution throughout the house. The stove should therefore be installed in the room where the
most time is spent, and in the most spacious room possible. Recall that wood stoves produce
radiating heat, the heat we feel when we are close to a wood stove. A wood stove also functions
by convection, which is through the displacement of hot air accelerated upwards and its
replacement with cooler air at the floor level. The stove's convection effect is facilitated by the
installation of a blower.
10