Troubleshooting - Vacmaster VWM1218R Operator's Manual

When the vacuum is nonuse, pls make sure
* The switch is on "O" off position
* The power cord is disconnected from the outlet
* Fig.3a only for 42mm; Fig 3b only for 35mm
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE TROUBLESHOOTING
Symptom
Vacuum will not operate
Dust comes out from motor cover.
Reduced efficiency and
motor/speed vibration.
Remote will not operate

TROUBLESHOOTING

Possible Causes
1) No power supply.
2) Faulty power cord.
3) Container full.
4) Switch in the wrong position
1) The cartridge filter is missing or
damaged.
1) There is a blockage in the
nozzle, hose, or the container inlet.
The cartridge filter is clogged by fine
dust.
1) Battery is dead.
Corrective Action
1) Check power supply – cord,
breakers, fuses.
2) Unplug and check the power
cord. If damaged, have it repaired
by a professional.
3) Empty container.
4) Press the ON 'I' button on the
power head.
1) Attach or replace cartridge filter.
1) Check nozzle, hose and
container inlets for blockage. Take
off the filter and clean it. Or install
new cartridge filter.
1) Replace the battery.
13
GB