Installing An Oil Wheel - Martin Mania DC3 User Manual

5. Replace the bulb. Use only a Philips 6958 24V 250W 10H lamp (Martin
P/N 97000115).
6. Close the fixture cover and tighten the thumb screw, taking care not to
trap any wires.
7. Reapply power to the fixture.
I N S T A L L I N G A N O I L W H E E L
The Mania DC3 is supplied with a multi-colored oil wheel. Other color
variants are available.
To install the oil wheel:
1. Disconnect the fixture from power and allow it to cool for 20 minutes if it
has been in use.
2. Remove the two oil wheel cover retaining screws and remove the
cover.
Basic service
Oil wheel cover
17