Choice Of Mounting - Martin Mania DC3 User Manual

Installing a plug on the mains lead
Warning! For protection from dangerous electric shock, the fixture must
be grounded (earthed). The AC mains supply must have
overload and ground-fault protection.
Important! Check that the feed cables are undamaged and rated for the
current requirements of all connected devices before use.
The fixture's mains lead may require a grounding-type cord cap that fits
your power distribution cable or outlet. Consult a qualified electrician if you
have any doubts about proper installation.
Following the cord cap manufacturer's instructions, connect the
appropriate wires to ground (earth), live, and neutral. The following table
below shows some common wire identification schemes.
Applying power
1. Connect the mains power cable to the fixture at the 3-prong IEC male
input socket at the rear of the fixture.
2. Turn the power on using the mains switch.
C H O I C E O F M O U N T I N G
The Mania DC3 may only be operated in a standing position or hung
overhead with a clamp. The fixture can be installed at an angle pointing
10
Function
live
neutral
ground
Mania DC10 Mains ID.cdr
Mania DC3 user manual
Wire (EU) Wire (US)
brown black
blue white
yellow/green green
Mains switch
Mains socket