Adjusting The Lens - Barco SIM 7Q series User Manual

5. Setup
5.7.4

Adjusting the lens

Description
The shift adjustment is done during the Installation phase.
The other adjustments possible on the lenses are:
• Motorized zoom
• Motorized focus : should be done during the installation phase
• ECR (Extended Contrast Ratio) : ECR is done through automatic adjustment of the lens opening (aperture). This is done during
for example Time of Day adjustment
How to adjust the lens using the direct keys on the RCU?
1. Use one of the following keys on the RCU:
- Lens shift (↑ or ↓): to shift down or up
- Lens zoom (- or +): to zoom out or in
- Lens focus (- or +): to adjust the focus
Image 5-21
How to shift using the OSD in combination with the RCU (or local keypad)?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Lens adjustments...
Image 5-22
62
Downloaded From projector-manual.com Barco Manuals
See the dedicated system manual for more information
C :
AUTION Make sure to unlock the focus ring and the zoom ring before adjusting the zoom or focus of the
lens!
C :
AUTION In case of a projector with rugged option, make sure to unlock the lens holder before shifting it up
/ down or left / right.
3 4
G
B R I H T N
1 2
C O N T R
L E N S L E N S
Z O O M SH I F T
S
L E N
F O C U S VO L
R59770066 SIM 7Q SERIES 07/10/2013