Adjusting The Lens - Barco SIM 7QP HB User Manual

7. Repeat step 3 to step 6 until the image stays in focus regardless to the zoom position
8. Fix the 4 screws
5.7.4

Adjusting the lens

Description
The shift adjustment is done during the Installation phase.
The other adjustments possible on the lenses are:
• Motorized zoom
• Motorized focus : should be done during the installation phase
• ECR (Extended Contrast Ratio) : ECR is done through automatic adjustment of the lens opening (aperture). This is done during
for example Time of Day adjustment
See the dedicated system manual for more information
C
AUTION
lens!
C
AUTION
/ down or left / right.
How to adjust the lens using the direct keys on the RCU?
1. Use one of the following keys on the RCU:
- Lens shift (↑ or ↓): to shift down or up
- Lens zoom (- or +): to zoom out or in
- Lens focus (- or +): to adjust the focus
3 4
1 2
L E N S
Z O O M
S
L E N
F O C U S
Image 5-21
How to shift using the OSD in combination with the RCU (or local keypad)?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Lens adjustments...
R59770330 SIM 7QP SERIES 08/12/2014
:
Make sure to unlock the focus ring and the zoom ring before adjusting the zoom or focus of the
:
In case of a projector with rugged option, make sure to unlock the lens holder before shifting it up
B R I G H T N
C O N T R
L E N S
SH I F T
VO L
5. Setup
45