Internal Black Level - Barco SIM 7Q series User Manual

7.8.5.4.2

Internal black level

What can be done ?
Internal black level can be adjusted via the projector's software using a dialog box. The dialog box allows to add an offset to the
black level of the image in the zones outside the soft edge zones. The range goes from 0 to 255.
How to adjust the internal black level ?
1. Press the MENU key to activate the Tool bar.
2. Push the cursor key ← or → to highlight Display setup
3. Push the ↓ key to pull down the menu.
4. Push ↓or ↑ to select Soft edge and alpha beta planes
5. Push the → key to pull down the menu.
6. Push the cursor key ← or → to highlight Black level...
Image 7-138
7. Press ENTER
A dialog box will be displayed.
Black Level
Planes
Internal
Beta planes
Image 7-139
8. Use the arrows to select the Internal check box and press ENTER
Note: It will take a certain time for the internal black level to be applied
9. Use the arrows or digits to fill in the desired values for the black level.
R59770066 SIM 7Q SERIES 07/10/2013
Downloaded From projector-manual.com Barco Manuals
Level
0
7. Advanced
175