Adjusting The Lens - Barco NW-12 User Manual

5. Setup
Image 5-10
7. Press ENTER
The projection is adapted and a bullet shows the active configuration.
5.6

Adjusting the lens

What must be done ?
Depending on the projection distance and the lens used, the image may not be at the desired size, position and/or may be out of
focus.
The projector will always allow you to shift your image Vertically as well as horizontally to position it on the screen. In addition,
motorized lenses will also allow you to Zoom and focus the image.
All these lens parameters can be adjusted using the RCU, the local keypad or in the Installation menu of the projector's OSD.
• Zoom (only for motorized lenses)
• Focus (only for motorized lenses)
• horizontal/vertical Shift
The lens can also be adjusted via the dedicated keys on the remote.
How to Zoom/focus or shift via the RCU (or keypad)
1. Press LENS ZOOM or
LENS FOCUS or LENS SHIFT on the RCU
3 4
2
1
L EN S
Z OO M
L EN S
F O CU S
Image 5-11
2. Use the arrow keys to adjust
44
BRI G HTN
C O NTR
L EN S
SH IFT
VO L
R59770286 NW-12 25/09/2008