Configuring The Date; Specifying The Primary Sf/Cpu - Nortel COMMISSIONING 8600 Commissioning

Variable
name <tz>
offset-from-utc <minutes>
Configuring the date
Configure the calendar time in the form of month, day, year, hour, minute,
and second.
Prerequisites
•
Procedure steps

Specifying the primary SF/CPU

Specify the primary SF/CPU to determine which SF/CPU you use as
the master after the switch performs a full power cycle only. When the
SF/CPU becomes the primary, the master LED for the SF/CPU is on.
Prerequisites
•
•
Copyright © 2008 Nortel Networks
.
You must log on to the Privileged EXEC mode in the NNCLI.
Action
Configure the date by using the following command:
clock set <MMddyyyyhhmmss>
You must log on to at least Privileged EXEC mode to use the show
command.
You must log on to the Global Configuration mode in the NNCLI to use
the configuration command in this procedure.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Specifying the primary SF/CPU 91
Value
Configures an abbreviated name for the
local time zone name. tz is the name.
For example, PST is Pacific Standard
Time.
To configure this option to the default
value, use the default operator with the
command.
Configures the time zone offset in
minutes to subtract from Universal
Coordinated Time (UTC), where positive
numbers mean west of Greenwich
and negative numbers mean east of
Greenwich. To configure this option to the
default value, use the default operator
with the command.