Nn46205-319 01.01 Standard 30 May; Assigning An Ip Address To The Management Port - Nortel COMMISSIONING 8600 Commissioning

116 Remote connection configuration using the NNCLI
Table 15
Job aid: Roadmap of remote connection NNCLI commands (cont'd.)
Command
web-server

Assigning an IP address to the management port

Assign an IP address to the management port to use it for out-of-band
(OOB) management. The standby IP must be in the same subnet as the
master IP. Create a virtual management port in addition to the physical
management ports on the switch management modules.
ATTENTION
The virtual IP address feature is not supported in a switch with mixed Nortel
Ethernet Routing Switch 8600 8190SM modules and 8691SF/CPU modules.
Prerequisites
•
Procedure steps
Step
1
2
3
Copyright © 2008 Nortel Networks
.
You must log on to the Global Configuration mode in the NNCLI.
Action
Assign an IP address to the management port by using the
following command:
boot config net mgmt ip <ipaddr> <mask> <value>
Assign an IP address to a virtual management port by using the
following command:
sys mgmt-virtual-ip <ipaddr/mask>
Save the changes to the boot.cfg and config.cfg files.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Parameter
enable
password <rwa/rw/ro> <username>
<passwd>
enable
help-tftp <WORD 0-256> http-port
<1-49151>
http-port <1-49151>
--End--