Connecting Dc Power - Nortel Secure Router 4134 Quick Start Manual

Procedure steps
Step
1
2

Connecting DC power

The following figure shows the location of the terminal block on the DC
power supply module.
Copyright © 2007, 2008 Nortel Networks
.
Action
Insert the female end of an appropriately rated AC power cord in
the AC receptacle on the rear panel of the Secure Router 4134,
as shown in the following figure.
Insert the male end of the power cord in a standard 110/220 V
AC power outlet.
CAUTION
Ensure you use an appropriately rated AC power
cord only. Do not use an extension cord.
CAUTION
ACHTUNG
Stellen Sie sicher, dass Sie nur ein angemessen
bewertetes Netzkabel für Gleichstrom verwenden.
Verwenden Sie kein Verlängerungskabel.
Nortel Secure Router 4134
Quick Start
NN47263-100 02.01 Standard
18 February 2008
Connecting power cables 47
--End--