Battery Calibration Sub-Menu; The Security Menu - General Dynamics Itronix GD2000 User Manual

GD2000 User Guide

Battery Calibration Sub-Menu

The process empties and charges the
Battery Calibration
battery, allowing the battery gauge to accurately monitor
the battery status. It will take from 10 to 16 ours to calibrate
the battery, depending on how much power the battery
already contains.
Field
Calibration Status
Remaining capacity
Remaining capacity
Battery Serial Number
Battery Status
Full Charge Capacity
Battery Voltage
Battery Average Current
BQ2060 Pack Status
Last Calibration Capacity
Last Calibration Date
Execute Battery Calibration

The Security Menu

You can set, change or remove passwords in the Security
menu.
note
If you have an Expansion Module
has TPM, the screen may have an additional TPM support
item listed in the table above. Please read the
Platform Module (TPM) section of this manual before
activating this feature.
General Dynamics Itronix 72-0139-001
Setting Function
Displays current battery calibration status, Non-Execute or Execute.
(none) Displays the remaining battery capacity.
(none) Displays the remaining battery capacity.
(none) Displays the battery serial number.
(none) Displays the current battery status.
(none) Indicates the full charge capacity.
(none) Displays the battery voltage.
(none) Displays the battery average current.
(none) Displays the BQ2060 Pack Status.
(none) Displays the last calibration capacity.
(none) Displays the last calibration date.
Yes Select Yes to execute the Battery Calibration process. Battery calibra-
No tion will take from 10 - 16 hours, depending upon how much power the
battery already contains.
installed and it
Trusted
Customizing the BIOS