Radio On/Off Hot Key (Option); To Turn All Radios On Or Off; Application Launch Buttons; To Program The Application Launch Buttons - General Dynamics Itronix GD2000 User Manual

GD2000 User Guide

Radio ON/OFF Hot Key (option)

Caution
FAA regulations require that all transmit/receive
devices be turned off during flight.
The wireless RADIO ON/OFF HOT KEY R
power on and off to all radio devices (including GPS, Blue-
tooth , WLAN, and WWAN radios).
®
If you have one or more radios (including GPS) in your com-
puter, use the RADIO ON/OFF HOT KEY
during flight. If you have radios and you do not have a switch
to turn the radios off, leave your computer off during flight.

To Turn all Radios on or off

1.
Press FN+R to power off all radio devices (airplane mode).
2.
FN+R
Press again to turn radio power on.

Zoom Keys

Zoom is an application that enlarges items on the display for better viewing. The
between the mouse buttons and the direction pad. Press the
When Zoom is active, use the following
Key Function
Combination
CTR+ALT+M Increase magnification
CTR+ALT+N Decrease magnification
CTRL+ALT+F Switch between full
screen and cursor mode
CTRL+ALT+Q Toggles the magnifier
on/off
CTRL+ALT+U Launch custom setting
user interface
General Dynamics Itronix 72-0139-001

Application Launch Buttons

Once programmed, press each application launch button to
start the associated application. The application launch but-
tons are marked
toggles the

To program the Application Launch Buttons

1.
to turn your radios off
2.
3.
4.
5.
6.
7.
ZOOM KEYS
CTRL+ALT+{KEY} combinations to access Zoom commands:
Description
Press and hold the
tion (the magnifier multiplier displays in the lower right corner of the window
or screen).
Press and hold the
tion (the magnifier multiplier displays in the lower right corner of the window
or screen).
Switches between magnification of the full screen and cursor mode (a small,
but expandable window area).
Press CTRL+ALT+Q
Press CTRL+ALT+U
of the magnifier.
and
C1, C2, C3,
Select Start, All Programs, Mobile Computer Tools, Config-
ure On-Screen Display, C1, C2, C3, and C4 Settings
Select the C1, C2, C3, or C4
screen.
Use the drop-down menu to select an application to associate
with the launch button .
Test
Click to test if the application will run; then click
cept the application.
note
If the application you want to run is not in the drop-
down menu: click the Add button next to the Current Selec-
tion field to display the "CustomExePrompt" screen.
Browse
Click the button to display the
Find the application you wish to call with the
LAUNCH BUTTON
and select it.
Click the Open button and enter a name for the application you
selected. Then press OK.
ZOOM KEYS are above the keyboard
to increase or decrease magnification.
CTRL+ALT+M key combination to increase the magnifica-
CTRL+ALT+N key combination to decrease the magnifica-
to launch or close the magnifier.
to launch the user interface to set the startup properties
Getting Familiar
below the keyboard.
C4
tab on the OSD Configuration
OK
to ac-
Open file
screen.
APPLICATION