Trusted Platform Module (Tpm) Menu; Security Menu With Tpm Support - General Dynamics Itronix GD2000 User Manual

GD2000 User Guide
Field
Set Supervisor
Password
Set User Password
Password on Boot
Set HDD Password
TPM Support
Submenu

Trusted Platform Module (TPM) Menu

Security Menu with TPM Support

Adding an expansion module with a TPM device, adds the
TPM support option to the BIOS Security menu.
Warning
Read all the instructions below and back up
your data, before attempting to activate this security feature.
If you have any questions or concerns contact the
Care Center for support.
Enable TPM Support to display the TPM State menu item
in the menu banner at the top of the screen.
Field
TPM Support
General Dynamics Itronix 72-0139-001
Setting
Enter New Password
Confirm New Password
Enter New Password
Confirm New Password
d
isabled
Enabled
Client
Setting Function
d Enables or disables the TPM support. Operation system will not show
isabled
TPM. Reset of platform is requied.
Enabled
Function
The supervisor password controls access to the Setup Utility. The
password must be entered and confirmed. The password can be
removed or changed by pressing enter on this field and entering the
current password, then pressing enter to move though the fields enter-
ing a new password, or leaving it blank to remove the password.
The user password controls access to the system at boot. The pass-
word can be removed or changed by pressing enter on this field and
entering the current password, then pressing enter to move though the
fields entering a new password, or leaving it blank to remove the pass-
word. This password can only be entered if the supervisor has entered
a password first.
Enables user password entry on boot.
Allows the user to set a password on the HDD.
Trusted Computing (TPM) settings.
Customizing the BIOS