Configuring The Management Ip Address - Nortel Contivity Secure IP Services Gateway 2700 Installation Manual

Configuring the management IP address

You use the serial interface to assign the VPN Router 2700 a management IP
address and subnet mask so that you can then use a Web browser for management.
To configure the management IP address using the serial interface:
1
2
3
4
Turn on the terminal or PC.
Configure the terminal or PC as follows:
• 9600 baud
• 8 data bits
• 1 stop bit
• no parity
• no flow control
Connect the serial cable (supplied with the VPN Router 2700) from the
gateway's serial port to a terminal or to the communications port on a PC.
On the PC, start HyperTerminal or another terminal emulation program, and
press Enter.
The Nortel VPN Router screen appears.
Nortel VPN Router
Copyright (c) 1999-2005 Nortel Networks, Inc.
Version:
Creation date:
Unit Serial Number:
Please enter the administrator's user name:
Enter the default user name and password for the administrator.
The factory default user name is admin and the default password is setup. The
user name and password are case sensitive.
Please enter the administrator's user name: admin
Please enter the administrator's password: *****
Chapter 3 Configuring the management IP interface 53
V07_0.024
Jul 6 2006, 08:23:16
510649
Nortel VPN Router Installation — VPN Router 2700