Removing The Front Bezel And Top Cover; Figure 20 Removing The Front Bezel - Nortel Contivity Secure IP Services Gateway 2700 Installation Manual

Removing the front bezel and top cover

To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
To remove the front bezel:
1
2

Figure 20 Removing the front bezel

3
Shut down the VPN Router 2700 using the Web GUI or the CLI and then
unplug it as described in
hardware" on page 60.
Warning: Risk of electric shock
Turn off the VPN Router 2700, and unplug the power cord before you
attempt to remove or install an option card or DIMM.
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
Grip the two handles, and firmly pull the bezel toward you to unsnap it from
the chassis.
Caution: Risk of equipment damage
Do not use the piece with the Nortel Networks logo and the LEDs as a
handle.
Chapter 4 Installing option cards and DIMMs 61
"Shutting down the system to add or replace
(Figure 20).
Nortel VPN Router Installation — VPN Router 2700
CS260015B