Minimum clearance from left edge of cutout to nearest combustible surface
A
Minimum clearance from right edge of cutout to nearest combustible surface
B
Minimum clearance from rear edge of cutout to:
C
Nearest combustible surface
Nearest non-combustible surface
Minimum height of non-combustible material when used on adjacent walls
D
Minimum clearance from cooktop surface to:
E
Rangehood
Any other overhead exhaust fan
Downward facing combustible surface
Downwards-facing tiled or fire resistant surface
Minimum clearance below top of benchtop to:
F
Combustible surface
Fisher & paykel oven or nearest non-combustible surface
Minimum distance from right edge of cooktop to gas connection point on wall (if using a flexible hose)
G
Distance from floor to gas connection point on wall (if using a flexible hose)
H
Maximum overall depth of overhead cabinetry
I
Minimum cleance from the cooktop surface to overhead cabinetry
J
Note: Ensure there is an earthed power outlet within 900 mm of the centre rear of the product. The gas connector on the wall should be 800-850 mm (H) above the floor and to a distance of at least 250 mm (G) outside the
width of the product, on the right-hand side. It should be accessible with the product installed.