If installed with an approved flexible
●
●
hose, the hose should not come
in contact with the bottom of the
appliance or any sharp edges. Flexible
hose assemblies should be BS 699.1
certified.
Seal exposed bare edges of the cutout
●
●
with an oil-based paint or moisture-
proof polyurethane to prevent possible
moisture creeping between the cooktop
trim and the benchtop.
When you install the appliance
If, after following the instructions
●
●
given, correct performance cannot be
achieved, please contact your nearest
Fisher & Paykel Authorised Service
Centre, Customer Care, or contact us
through our website listed at the end of
this document.
Wok stand (1)
Foam tape (1)
4
1
SAFETY AND WARNINGS
2
PARTS SUPPLIED
Fibre
Elbow 1/2" BSP
washers (1)
external thread (1)
Clamping
LPG test
brackets (4)
point adaptor (1)
and screws (4)