Replacement Parts; Ec Declaration Of Conformity - Flymo CONTOUR POWER PLUS CORDLESS Original Instructions Manual

• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
If any part is found to be defective due to faulty
manufacture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will effect
the repair or replacement to the customer free of charge
providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
Spool and line
Reference no.: FLY047
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation.............................Lawn Trimmer
Designation of Type(s).............CCT250
Identification of Series.............See Product Rating Label
Year of Construction................See Product Rating Label
Conforms to the essential requirements
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN786, EN60335-2-29, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
given in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure...............
Notified Body.................................................
Huskvarna 16/01/2013
A. Rangert
Global R D Director - Hand held
Keeper of technical documentation
Service Recomendations
Guarantee and Guarantee Policy

Replacement Parts

EC Declaration of Conformity

provisions of the following EC Directives:
at the operator's position, measured according to EN60335-2-91is
pA
h
Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Type
Width of Cut (mm)
Speed of Rotation of Cutting Device (rpm)
Measured Sound Power L
Guaranteed Sound Power L
L
Sound pressure (dB(A))
pA
K
Uncertainty (dB(A))
pA
a
Hand / arm vibration
h
K
Uncertainty (m/s 2 )
ah
Weight (Kg)
ENGLISH - 3
this Operator s Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
Failures as a result of not reporting an initial fault.
Failures as a result of sudden impact.
Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator s Manual.
Machines used for hire are not covered by this guarantee.
The following items listed are considered as wearing
parts and their life is dependent on regular
maintenance and are, therefore not normally subject to
a valid warranty claim: Nylon Line, Spool
Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or
approved by Husqvarna UK Ltd., or by the machine
having been modified in any way.
Part no.:
measured according to EN ISO 20643 on a sample of the above
WA
(dB(A))
WA
(dB(A))
WA
(m/s 2 )
510747890
values are according to the tabulated
CCT250
25
8,000
84
92
81
2.5
1.94
1.5
5.3
Line