Replacement Parts; Ec Declaration Of Conformity - Flymo CCTE25 Original Instructions Manual

Spool and Line
Reference no.:
If any part is found to be defective due to faulty manufac-
ture within the guarantee period, Husqvarna UK Ltd.,
through its Authorised Service Repairers will effect the
repair or replacement to the customer free of charge pro-
viding:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised
by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminish-
es the customers statutory rights.
Failures due to the following are not covered, therefore it is
important that you read the instructions contained in this
Operator's Manual and understand how to operate and
maintain your machine:
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designaion ............................................... Lawn Trimmer
Designation of Type(s ............................... CCTE25
Identification of Series ............................... See Product Rating Label
Year of Construction ................................. See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2006/95/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN 60335-1, EN 60335-2-91, EN 60335-2-29, EN 62233, EN 55014-1, EN 55014-2
The maximum A weighted sound pressure level L
is given in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure ........... Annex VI
Notified Body ............................................ Intertek, Davy Avenue,
Ulm, 05.11.2013
P. Lameli
Chief Technical Officer
Keeper of technical documentation
5012693-02 Contour Cordless 24V Euro.indb 5

Replacement Parts

FLY047
Guarantee & Guarantee Policy

EC Declaration of Conformity

at the operator's position, measured according to EN 60335-2-91
pA
measured according to EN 60335-2-91 on a sample of the above
h
& Guaranteed Sound Power L
WA
Knowlhill,
Milton Keynes,
Bucks, MK5 8NL,
England
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Measured Sound Power L
WA
Guaranteed Sound Power L
WA
Sound pressure L (dB(A))
pA
Uncertainty K (dB(A))
pA
Hand / arm vibration a (m/s )
2
h
Uncertainty K (m/s )
2
ah
Weight (Kg)
ENGLISH – 5
Part no.:
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and recommenda-
tions contained in this Operator's Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as wearing
parts and their life is dependent on regular mainte-
nance and are, therefore not normally subject to a valid
warranty claim: Nylon Line, Spool and Line.
* Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or addition-
al parts that are not either manufactured or approved
by Husqvarna UK Ltd., or by the machine having been
modified in any way.
values are according to the tabulated
WA
(dB(A))
(dB(A))
510747890
CCTE25
25
8,500
82
96
74.4
2.5
1.8
1.5
3.2
11.01.16 09:49