Table of Contents
Advertisement
Programming
3
{V}/{^}: "Base Unit PIN" i
M
4
Enter the current 4-digit base unit
PIN (default: "0000").
5
Enter the new 4-digit base unit PIN.
i M i {ic}
Incoming call barring (Caller
ID subscribers only)
This feature allows the unit to reject calls
from specified phone numbers that you
do not want to answer such as junk calls.
When a call is received, the unit does not
ring while the caller is being identified. If
the phone number matches an entry in
the call barred list, the unit sends out a
busy tone to the caller, and then
disconnects the call.
Important:
L When the unit receives a call from a
number that is stored in the call barred
list, the call is logged in the caller list
(page 26) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list by using the caller list
or by entering the numbers directly.
Important:
L You must store the phone number
with an area code in the call barred
list.
■ From the caller list:
1
K (middle soft key)
2
{V}/{^}: "Caller List" i
M
3
{V}/{^}: Select the entry to be
barred. i K
4
{V}/{^}: "Add Bar List" i
M
5
{ic}
22
■ By entering phone numbers:
1
K (middle soft key)
2
{V}/{^}: "Caller Barred" i
M i ~
3
Enter the phone number (24
digits max.). i M
L To erase a digit, press {C/T}.
4
{ic}
Viewing/editing/erasing bar call
numbers
1
K (middle soft key)
2
{V}/{^}: "Caller Barred" i
M
3
{V}/{^}: Select the desired entry.
L To exit, press {ic}.
4
Proceed with the desired operation.
■ Editing a number:
K i {V}/{^}: "Edit" i
M i Press {<} or {>} to
move the cursor. i Edit the
number. i M i {ic}
■ Erasing a number:
K i {V}/{^}: "Erase" i
M i {V}/{^}: "Yes" i M
i {ic}
Note:
L When editing, press the desired dial
key to add, {C/T} to erase.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L The additional handset model
recommended for use with this unit is
Advertisement
Table of Contents
