Maintenance And Care - Flex WST 700 VV Original Operating Instructions

WST 700 VV / WST 700 ECO
Heavily worn corners of the triangular sanding
head can easily be replaced.

Maintenance and care

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâI=éìää=çìí=íÜÉ=ã~áåë=
éäìÖK=
Cleaning
t^okfkd>
aç åçí=ìëÉ=ï~íÉê=çê=äáèìáÇ=ÇÉíÉêÖÉåíëK
 Regularly blow out the housing interior
and motor with dry compressed air.
 Blow out the sanding head (sanding plate
and gimbal bearing) with dry compressed
air.
Replacing the sanding plate on the
round sanding head
 Take hold of the sanding plate together with
the sanding head housing to prevent the
sanding plate from turning.
 Unscrew the retaining nut on the sanding
plate in an anti-clockwise direction
and remove.
 Remove the sanding plate.
 Insert new sanding plate and secure with
the retaining screw.
Replacing the brush ring
 Remove the sanding plate (B) (see section
entitled "Replacing the sanding plate").
 Loosen the retaining screws (C).
 Take the ring (D) out of the housing.
 Insert a new brush ring into the housing
and screw in the retaining screws.
Attention:
The brush ring can be fitted in one position only.
Note recess on the springs!
 Re-insert the sanding plate (B).
Repairs
Repairs may be carried out by an authorised
customer service centre only.
klqb
aìêáåÖ=íÜÉ=ï~êê~åíó=éÉêáçÇ=Çç=åçí=äççëÉå=
íÜÉ ëÅêÉïë=çå=íÜÉ=ãçíçê=ÜçìëáåÖK=
kçåJÅçãéäá~åÅÉ=ïáää=ÇÉÉã=íÜÉ=Öì~ê~åíÉÉ=
çÄäáÖ~íáçåë=çÑ=íÜÉ=ã~åìÑ~ÅíìêÉê=åìää=~åÇ=îçáÇK
Spare parts and accessories
Other accessories, in particular insertion tools,
can be found in the manufacturer's catalogues.
Exploded drawings and spare-part lists can be
found on our homepage: www.flex-tools.com
23