Noise And Vibration; Additional Safety Instructions - Flex WST 700 VV Original Operating Instructions

WST 700 VV / WST 700 ECO

Additional safety instructions

t^okfkd>
qçìÅÜáåÖ=çê=áåÜ~äáåÖ=Ü~êãÑìäLíçñáÅ=Çìëí=áë=
~ Ü~ò~êÇ=íç=íÜÉ=çéÉê~íçê=~åÇ=íç=éÉçéäÉ=áå=
íÜÉ îáÅáåáíóK
 It is not recommended to sand lead paint.
Lead paint should be removed by
a specialist only.
 Do not grind or cut materials which release
hazardous substances (e.g. asbestos).
Take precautions if hazardous, combustible
or explosive dust is likely to occur.
Wear protective dust mask. Use dust
extraction system.
 If plaster board or plaster is sanded, this may
cause static electricity to build up on the tool.
To ensure your safety, the long-necked
sander is earthed. Remove dust with an
earthed dust extractor only.
a^j^db=ql=molmboqv>
 The mains voltage and the voltage
specifications on the rating plate must
correspond.

Noise and Vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
– Sound pressure level:
– Sound power level:
– Uncertainty:
Total vibration value (when sanding
smoothed plasterboard walls):
– Emissions value
with round sanding head:
with triangular sanding head: a
– Uncertainty:
t^okfkd>
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=~åÇ=
îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
83 dB(A);
94 dB(A);
K = 3 dB.
2
a = 2.8 m/s
h
2
= 4.5 m/s
h
2
K = 1.5 m/s
klqb
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure. The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
For a precise estimation of the vibration load the
times should also be considered during which the
power tool is switched off or even running, but not
actually in use. This may significantly increase the
exposure level over the total working period
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
`^rqflk>
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK
17