Specifications - Bosch PCL 20 Original Instructions Manual

OBJ_BUCH-725-007.book Page 10 Wednesday, October 21, 2015 7:42 PM
10 | English
 The measuring tool is provided with a warning label
(marked with number 12 in the representation of the
measuring tool on the graphics page).
IEC 60825-1:2014, <1 mW, 635 nm/650 nm
Laserstrahlung
Nicht in den Strahl blicken
Laser Klasse 2
 If the text of the warning label is not in your national lan-
guage, stick the provided warning label in your national
language over it before operating for the first time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not make any modifications to the laser equipment.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Product Description and

Specifications

Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines as well as plumb points.
The measuring tool is suitable exclusively for operation in
enclosed working sites.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Laser line
2 Exit opening for laser beam
3 Plumb beam
4 Automatic levelling indicator
5 Operating-mode indication
1 609 92A 1CE | (21.10.15)
6 Operating mode button
7 On/Off switch
8 Tripod mount 1/4"
9 Latch of battery lid
10 Battery lid
11 Serial number
12 Laser warning label
13 Tripod*
14 Wall holder*
15 Unlocking buttons of the holding plate
16 Holding plate of the wall mount
17 Fastening screw for wall mount
18 1/4" screw of wall mount
19 Laser viewing glasses*
20 Protective pouch
* The accessories illustrated or described are not included as
standard delivery.
Technical Data
Cross-line Laser
Article number
Working range to approx.
Levelling accuracy
– Laser line
– Plumb beam (upward)
– Plumb beam (downward)
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
– Laser line
– Plumb beam
C (laser line)
6
1)2)
Laser line width
– at a distance of 3 m
– at a distance of 5 m
Tripod mount
Batteries
Rechargeable batteries
Operating time, approx.
Weight according to
EPTA-Procedure 01:2014
Dimensions (length x width x height)
1) at 25 °C
2) The width of the laser line depends on the surface characteristics and
on the ambient conditions.
The measuring tool can be clearly identified with the serial number 11
on the type plate.
PCL 20
3 603 K08 2..
10 m
±0.5 mm/m
±0.5 mm/m
±1 mm/m
±4°
4 s
+5 °C...+40 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
650 nm, <1 mW
10
<3 mm
<5 mm
1/4"
4 x 1.5 V LR6 (AA)
4 x 1.2 V HR6 (AA)
35 h
0.48 kg
123 x 67 x 110 mm
Bosch Power Tools