Specifications - Bosch PLL 360 Original Instructions Manual

10 | English
Do not use the laser goggles as protective goggles.
u
The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while
u
driving. The laser goggles do not provide full UV protec-
tion and impair your ability to see colours.
Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This
will ensure that the safety of the measuring tool is main-
tained.
Do not let children use the laser measuring tool unsu-
u
pervised. They could accidentally dazzle someone.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
Keep the measuring tool away from cardiac
pacemakers. The magnet inside the measuring
tool generates a field that can impair the function
of cardiac pacemakers.
Keep the measuring tool away from magnetic data
u
carriers and magnetically sensitive equipment. The ef-
fect of the magnet can lead to irreversible data loss.
Product Description and

Specifications

Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines.
The measuring tool is suitable for indoor use.
Product features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) On/off switch
(3) 1/4" tripod mount
(4) Laser warning label
(5) Serial number
(6) Battery compartment cover
(7) Locking mechanism of the battery compartment
cover
(8) Button for switching off automatic levelling Lock
(9) Button for laser operating mode Mode
(10) Levelling warning
(11) "Laser operating mode" indicator
(12) "Working without automatic levelling" indicator
A)
(13) Universal holder
1 609 92A 4J0 | (25.01.2019)
A)
(14) Holder rotary knob
A)
(15) Holder mounting plate
A)
(16) Holder base plate
A)
(17) Holder 1/4" screw
A)
(18) Tripod
(19) Protective bag
A)
(20) Laser viewing glasses
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cross line laser
Article number
Working range (diameter) up to
A)
approx.
Levelling accuracy
Typical self-levelling range
Typical levelling time
Operating temperature
Storage temperature
Max. altitude
Relative air humidity max.
Pollution degree according to
IEC 61010-1
Laser class
Laser type
C
6
Divergence
Tripod mount
Batteries
Rechargeable batteries
Operating time, approx.
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width ×
height)
A) The working range may be reduced by unfavourable environ-
mental conditions (e.g. direct sunlight).
B) Only non-conductive deposits occur, whereby occasional tem-
porary conductivity caused by condensation is expected.
The serial number (5) on the type plate is used to clearly identify your
measuring tool.
Fitting
Inserting/Changing the batteries
It is recommended that you use alkaline manganese batter-
ies to operate the measuring tool.
PLL 360
3 603 F63 000
20 m
±0.4 mm/m
±4°
4 s
+5 °C to +40 °C
−20 °C to +70 °C
2000 m
90 %
B)
2
2
635 nm, <1 mW
1
0.5 mrad (full angle)
1/4"
4 × 1.5 V LR6 (AA)
4 × 1.2 V HR6 (AA)
12 h
0.38 kg
85 × 70 × 125 mm
Bosch Power Tools