Open Ports Dynamically By Port Triggering - TP-Link archer VR900V User Manual

Chapter 11
Done!
11 2

Open Ports Dynamically by Port Triggering

Port triggering can specify a triggering port and its corresponding external ports. When
a host in the local network initiates a connection to the triggering port, all the external
ports will be opened for subsequent connections. The modem router can record the IP
address of the host. When the data from the Internet return to the external ports, the
4 Click View Existing
port, internal port and protocol will be automatically filled
with contents. Enter the PC's IP address 192.168.1.100 in the
Internal IP field.
5 Click
OK to save the settings.
Tips:
1. It is recommended to keep the default settings of
are not clear about which port and protocol to use.
2. If the service you want to use is not in the
corresponding parameters manually. You should verify the port number that the
service needs.
3. You can add multiple virtual server rules if you want to provide several services in a
modem router. Please note that the
Users in the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by
ISP, it is recommended to apply and register a domain name for the WAN by DDNS,
go to Set Up a Dynamic DNS Service Account
use http://domain name
2. If you have changed the default
External Port or http:// domain name: External Port
Services, and choose HTTP. The external
Internal Port
Service
External Port cannot be overlapped.
http:// WAN IP
for more information. Then you can
to visit the website.
External Port, you should use
to visit the website.
NAT Forwarding
and Protocol if you
Type, you can enter the
(in this example:
http:// WAN IP:
87