Led Explanation - TP-Link archer VR900V User Manual

Chapter 1
Name
Power
VDSL/ADSL
Internet
Wireless 2.4Ghz
Wireless 5Ghz
LAN
USB
Phone

LED Explanation

Status
On System initialization complete.
System initializing or firmware upgrading is in process. Do not
Flashing
disconnect or power off the modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On DSL line is synchronized and ready to use.
Flashing The DSL negotiation is in progress.
DSL synchronization failed. Please refer to Note 1 for
Off
troubleshooting.
On The network is available with a successful Internet connection.
There is no successful Internet connection or the modem
Off router is operating in Bridge mode. Please refer to Note 2 for
troubleshooting.
On The wireless 2.4GHz band is working properly.
WPS handshaking is in process and will continue for about
Quick 2 minutes. Please press the WPS button on other wireless
Flashing devices that you want to add to the network while the LED
is flashing.
Off The wireless 2.4 GHz band is disabled.
On The wireless 5GHz band is working properly.
WPS handshaking is in process and will continue for about
Quick 2 minutes. Please press the WPS button on other wireless
Flashing devices that you want to add to the network while the LED
is flashing.
Off The wireless 5GHz band is disabled.
On At least one LAN port is connected.
Off No LAN port is connected.
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
On The phone is off-hook or cordless phone is busy.
Flashing The phone is ringing or cordless phone is registering.
Off The phone is on-hook.
Get to Know about Your Modem Router
Indication
11