Table of Contents
Advertisement
Chapter 12
12 1
LAN Settings
12 1 1
Change the LAN IP Address
The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log
in to its web-based management page. The LAN IP address together with the Subnet
Mask also defines the subnet that the connected devices are on. If the IP address
conflicts with another device on your local network or your network requires a specific
IP subnet, you can change it.
Follow the steps below to change your IP address.
1
Visit
http://tplinkmodem.net
router.
2
Go to
Advanced
3
Type in a new
IP Address
4
Select the
Subnet Mask
the IP address identifies the local IP subnet.
5
Keep
IGMP Snooping
listening to IGMP (Internet Group Management Protocol) network traffic. The
function prevents hosts on a local network from receiving traffic for a multicast
group they have not explicitly joined.
6
Leave the rest of the default settings as they are.
7
Click
Save
to make the settings effective.
12 1 2
Use the Modem Router as a DHCP Server
You can configure the modem router to act as a DHCP server to assign IP addresses to
its clients. To use the DHCP server function of the modem router, you must configure all
computers on the LAN to obtain an IP Address automatically.
Follow the steps below to configure DHCP server.
, and log in with the password you set for the modem
>
Network
>
LAN Settings
appropriate to your needs.
from the drop-down list. The subnet mask together with
as enabled by default. IGMP snooping is the process of
Specify Your Network Settings
page and select IPv4.
92
Advertisement
Table of Contents
