Reserve Lan Ip Addresses - TP-Link archer VR900V User Manual

Ac1900 wireless dual band gigabit voip vdsl2 modem router
Table of Contents

Advertisement

Chapter 12
1
Visit
http://tplinkmodem.net
router.
2
Go to
Advanced
3
Select
DHCP
to enable the DHCP function and select
4
Specify the
IP Address
subnet with LAN IP. The modem router will assign addresses within this specified
range to its clients. It is from 192.168.1.100 to 192.168.1.199 by default.
5
Enter a value for the
time in which a DHCP client can lease its current dynamic IP address assigned by the
modem router. After the dynamic IP address expires, the user will be automatically
assigned a new dynamic IP address. The default is 1440 minutes.
6
Keep the rest of the settings as default and click
Note:
1. The modem router can be configured to work as a
data between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the
device's interfaces can be configured as a DHCP relay. If it is enabled, the DHCP requests from local PCs will be
forwarded to the DHCP server that runs on WAN side.
2. You can also appoint IP addresses within a specified range to devices of the same type by using
feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera
devices, thus facilitating the network management. Enable DHCP feature and configure the parameters according
to your actual situation on
12 1 3

Reserve LAN IP Addresses

You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
, and log in with the password you set for the modem
>
Network
>
LAN Settings
Pool, the start address and end address must be on the same
Address Lease
Time. The
DHCP
Advanced
>
Network
>
LAN Settings
Specify Your Network Settings
page and select IPv4.
DHCP
Server.
Address Lease Time
Save
to make your settings effective.
Relay. A DHCP relay is a computer that forwards DHCP
page.
is the amount of
Condition Pool
93

Advertisement

Table of Contents
loading

Table of Contents