Advertisement
VPNremote for 4600 Series IP Telephone Configuration
Entering your User Name and Password
At startup, the phone will attempt to establish a VPN connection using the Administrator
configured VPN parameters. You are given the option to change the VPN parameters. To
change the VPN parameters, press the Edit button indicated on the VPN startup screen to
enter the user name and password.
When entering information through the telephone keypad, use the Case button, or fifth gray
button, to switch between upper-case letters and lower-case letters. Use the left and right
arrow keys at the bottom of the display to move left or right. Press the Done button at the
lower left corner of the display to return to the configuration options.
Use the following procedure and the telephone key pad to enter the user name and password:
1. Select the VPN option to change by using the gray buttons on the left of the display.
Press the User Name button, or second gray button, to change the VPN user name.
The user name is the same name used to login to the enterprise network using
VPNremote Client.
2. Enter your user name using the telephone key pad. Press the alpha-numeric keys until
the desired letter appears.
3. Select the VPN option to change by using the gray buttons on the left of the display.
Press the Password button, or third gray button, to change the VPN password.
The password is the same password used to login to the enterprise network using
VPNremote Client.
4. Enter your password using the telephone key pad. Press the alpha-numeric keys until
the desired letter appears.
5. Press Done to complete the configuration.
©2007 Avaya Inc, All rights reserved.
P/N 19-
602363
06/07
Advertisement
