Avaya VPNremote for 4600 Series User Installation And Configuration Quick Start page 3

VPNremote for 4600 Series IP Telephone Installation
Connecting the VPNremote Phone to your computer
Use the following procedure to connect your VPNremote phone to your
1
1. Connect the Ethernet cable to the right
port on the back of the telephone.
3
3. Connect the Cat5e cable to the Avaya
power source line in jack. The line in
jack on the Avaya power brick is on
the right side and is labeled Line In.
Ethernet
cable
5
5. Connect the Avaya power brick or PoE
switch power cord to an AC outlet to
power-up the telephone.
Ethernet
cable
2
Ethernet cable
4
CAT5
NOTE: Your
CAT5
2. Connect the other end of the Ethernet
cable to the Avaya power source phone
jack. The phone jack on the Avaya
power source is on the left side and is
labeled Phone.
Ethernet
cable
4. Disconnect your computer
and connect the other end of the straight
through Ethernet cable to your
Computer
Ethernet
cable
computer
are only connected to one another.
Your computer
SOHO.
©2007 Avaya Inc, All rights reserved.
computer :
from your SOHO
computer
CAT5
and VPNremote Phone
is not connected to your
P/N 19- 602363
.
06/07