Advertisement
VPNremote for 4600 Series IP Telephone Installation
Installing the VPNremote Phone into your SOHO
Use the following procedure to install the VPNremote Phone into your SOHO:
1
1. Connect the Ethernet cable to the right
port on the back of the telephone.
3
3. Connect the Cat5e cable to the Avaya
power source line in jack. The line in
jack on the Avaya power brick is on
the right side and is labeled Line In.
Ethernet
cable
5
5. Connect the Avaya power brick or PoE
switch power cord to an AC outlet to
power-up the telephone.
Ethernet
cable
2
Ethernet cable
4
CAT5
CAT5
2. Connect the other end of the Ethernet
cable to the Avaya power source phone
jack. The phone jack on the Avaya
power source is on the left side and is
labeled Phone.
Ethernet
cable
4. Connect the other end of the straight
through Ethernet cable to your SOHO.
Ethernet
cable
©2007 Avaya Inc, All rights reserved.
DSL or Cable
Modem
CAT5
P/N 19-
602363
06/07
Advertisement
