Installing An Hpe Smart Storage Battery - HP hpe proliant dl20 gen9 User Manual

Install the Smart Array controller in slot 2.
8.
Connect all necessary internal cables to the storage controller. For internal drive cabling information,
9.
see "Storage cabling (on page 81)."
Install the PCI riser cage (on page 23).
10.
Connect the other end of the storage controller cables to the drive backplane. For internal drive
11.
cabling information, see "Storage cabling (on page 81)."
Connect the FBWC cable to the system board. For more information, see "FBWC module cabling
12.
(on page 85)."
If you are planning to install the Smart Storage Battery Pack, install it now
13.
Storage Battery" on page 48).
Install the access panel (on page 21).
14.
Do one of the following:
15.
Slide the server into the rack.
o
Install the server into the rack
o
Connect each power cord to the server.
16.
Connect each power cord to the power source.
17.
Power up the server (on page 17).
18.
If removed, install the security bezel
19.
If you are planning to install new drives, install them now
20.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the Hewlett Packard Enterprise website (http://www.hpe.com/info/smartstorage/docs).
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/info/smartstorage/docs).

Installing an HPE Smart Storage Battery

For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
CAUTION: In systems that use external data storage, be sure that the server is the first unit
to be powered down and the last to be powered back up. Taking this precaution ensures that
the system does not erroneously mark the external drives as failed when the server is powered
up.
To install the component:
If installed, remove the security bezel (on page 17).
1.
Power down the server (on page 17).
2.
Remove all power:
3.
("Installing the server into the
("Security bezel option" on page 36).
("Drive
("Installing an HPE Smart
rack" on page 30).
options" on page 36).
Hardware options installation 48