Configuration Notes
Configuration Notes
The following information describes provisioning caveats.
Reference Sources
For information on supported IETF drafts and standards as well as standard and proprietary
MIBS, refer to
Page 42
•
The IOM can only be designated slot 1 of the chassis.
•
An IOM must be preprovisioned to accept specific adapter card types; the card type
is always iom-1g.
If an adapter card type is installed in a slot provisioned for a different type, the card
will not initialize.
•
An adapter card installed in an unprovisioned slot remains administratively and
operationally down until the IOM software is activated and the MDA slot and type
is specified.
•
Ports cannot be provisioned until the IOM software is activated and the MDA type
is specified.
Standards and Protocol Support on page
7705 SAR OS Interface Configuration Guide
221.