Table 14: Show Specific Port Output Fields (Sonet/Sdh Port) - Alcatel-Lucent 7705 Interface Configuration Manual

7705 SAR OS Interface Configuration Guide

Table 14: Show Specific Port Output Fields (SONET/SDH Port)

Label
SONET/SDH interface
Description
Interface
Speed
Admin Status
Oper Status
Physical Link
Loopback Mode
Single Fiber
Mode
Ing. Pool % Rate
Egr. Pool % Rate
Clock Source
Framing
Last State
Change
Port IfIndex
Last Cleared
Time
DDM Events
Description
A text description of the port
The port ID displayed in the slot/mda/port format
The speed of a SONET/SDH port
Up — the administrative state is up
Down — the administrative state is down
Up — the operational state is up
Down — the operational state is down
Yes — a physical link is present
No — a physical link is not present
The loopback mode on the port
Yes — single fiber mode
No — not single fiber mode
The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port for ingress
buffering
The amount of egress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port for egress
buffering
node — the link uses the internal clock when transmitting data
loop — the link recovers the clock from the received data stream
sonet — the port is configured for SONET framing
sdh — the port is configured for SDH framing
The last time that the operational status of the port changed state
The interface's index number, which reflects its initialization sequence
The time since the last clear
Enabled — digital diagnostic monitoring events is enabled for the
port
Disabled — digital diagnostic monitoring events is disabled for the
port
7705 SAR Interfaces
Page 151