Table 18: Show Port Detail Output Fields (Tdm Ds1 Interface) - Alcatel-Lucent 7705 Interface Configuration Manual

Card, Adapter Card, and Port Command Reference
Page 170

Table 18: Show Port Detail Output Fields (TDM DS1 Interface)

Label
Description
Interface
Type
Admin Status
Physical Link
Signal Mode
Last State Change
Loopback
Remote Loop respond
Load-balance-algo
Cfg Alarm
Alarm Status
Hold time up
Hold time down
Framing
Oper Status
Clock Source
Channel IfIndex
In Remote Loop
Egr. Sched. Pol
Traffic Statistics
Description
A text description of the port
The port ID displayed in the slot/mda/port format
The type of interface
Up — the port is administratively up
Down — the port is administratively down
Yes — a physical link is present
No — a physical link is not present
The port signaling mode
The last time that the operational status of the port changed state
The port loopback mode
The DS1 channel response to remote loopbacks
The load balance algorithm used on the port
The type of alarms to be logged and reported for the port
The current alarm state
The hold-timer value for link-up event dampening
The hold-timer value for link-down event dampening
The DS1 framing to be used for the port
up — the port is operationally up
down — the port is operationally down
adaptive-timed
incoming pseudowire packets
loop-timed — the link recovers the clock from the received
data stream
node-timed — the link uses the internal clock when
transmitting data
The channel interface index number
Specifies whether incoming remote loopback is enabled
The egress scheduling policy
Traffic statistics
7705 SAR OS Interface Configuration Guide
— clocking is derived from the