Configuring Adapter Card Fabric Profile
Use the following CLI syntax to assign a fabric profile on an adapter card.
CLI Syntax: config>card>mda#
Configuring Ports
This section provides the CLI syntax and examples to configure the following:
7705 SAR OS Interface Configuration Guide
mda-type {a16-chds1|a8-eth|a8-ethv2|a4-oc3}
[no] fabric-stats-enabled
network
ingress
access
ingress
no shutdown
•
Configuring Ethernet Port Parameters
→
Ethernet Network Port
→
Ethernet Access Port
•
Configuring Channelized Ports
→
Verifying the Adapter Card Type
•
Configuring SONET/SDH Port Parameters
→
SONET/SDH Access Port
•
Configuring ATM Interface Parameters
→
ATM Interface Commands
•
Configuring Multilink PPP Bundles
•
Configuring Multilink ATM Inverse Multiplexing (IMA) Groups
→
IMA Groups
→
Configuration Notes
→
IMA Test Procedure
fabric-policy <fabric-policy-id>
queue-policy <name>
fabric-policy <fabric-policy-id>
7705 SAR Interfaces
Page 53