Intended Use; Technical Data - Bosch ART COMBITRIM 23 Original Instructions Manual

OBJ_BUCH-2342-001.book Page 12 Wednesday, October 29, 2014 10:34 AM
12 | English
Extension cords/leads should only be
used if they comply with H05VV-F or
H05RN-F types.
Products sold in GB only: Your prod-
uct is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.

Technical Data

Trimmer
Article number
Rated power
No-load speed
Cutting line feed
Adjustable handle
Trimmer-head angle adjust-
ment/edging adjustment
Cutting line diameter
Extra Strong Cutting line diameter
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
F 016 L81 210 | (29.10.14)
Symbol

Intended Use

The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 °C and 40 °C
ambient temperature.
ART 23 COMBITRIM/
ART 2300 COMBITRIM
3 600 H78 B..
W 400
-1
min 12 000
Bump feed


mm 1.6
mm 2.4
Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Audible noise
Accessories/Spare Parts
ART 26 COMBITRIM/ ART 30 COMBITRIM/
ART 2600 COMBITRIM ART 3000 COMBITRIM
3 600 H78 C..
450
11 500
Bump feed


1.6
2.4
3 600 H78 D..
500
10 500
Bump feed


1.6
2.4
Bosch Power Tools