OBJ_BUCH-1685-006.book Page 15 Wednesday, September 21, 2016 3:33 PM
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
Remove battery before adjusting or cleaning, and be-
fore leaving the machine unattended for any period.Al-
ways wear gardening gloves when handling or working
near the sharp blades.
Examine the machine and replace worn or damaged parts
Always lubricate the cutting blade with protective spray
Keep all nuts, bolts and screws tight to be sure that the ma-
chine is in safe working condition.
Ensure replacement parts fitted are Bosch approved.
Always lubricate the cutting blade with protective
spray before use.
Cordless hedge trimmer
No-load stroke rate
Weight according to EPTA-Procedure 01:2014
Number of battery cells
Bosch Power Tools
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
Wear protective gloves
Wear eye protection.
The machine is intended for cutting and trimming hedges and
bushes in domestic use.
3 600 H49 B..
See serial number (type plate) on the machine
1 607 A35 05E
English | 15
3 600 H49 A..
1 607 A35 05E
F 016 L81 560 | (21.9.16)