Maintenance; Daily Maintenance; Regular Maintenance; Disposal Of The Machine - Kemppi Kempact MIG 2530 Operating Manual

4.

MAINTENANCE

4.1

Daily maintenance

Be careful of mains voltage when handling electric cables!
NOTE!
Clean the wire channel of the electrode and check the contact tip regularly. Always check the
condition of the mains and welding cable before operation and replace defective cables.
Only a competent electrician is allowed to remove or install the mains cable!
NOTE!
4.2

Regular maintenance

KEMPPI -service workshops sign special service contracts with customers for regular
maintenance. All parts are cleaned, checked and if necessary, repaired. Also the operation of
the welding machine is tested.
4.3

Disposal of the machine

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
5.

ORDERING NUMBERS

Kempact MIG 2530
GH 30 Gun holder
MMT 25
MMT 25
MMT 27
MMT 27
Earth cable 35 mm²
Transport unit ST 7
Transport unit P250
Lift hook
Wire spool pole
5 kg spool adapter
Gas hose
© Kemppi Oy / 1204
3 m
4.5 m
3 m
4.5 m
5 m
6 m
621853002
6256030
6252513MMT
6252514MMT
6252713MMT
6252714MMT
6184311
6185290
6185268
4298180
4289880
4251270
W000566
EN
11