Appendix A. Factory Default - Planet RS-21 KLMR User Manual

Full HD Outdoor IR POE IP Camera
ICA-3250V

Appendix A. Factory Default

To recover the default IP address and password, please follow the steps:
• Remove the power and Ethernet cable.
• Take an electronic wire, plug one side of the wire into "Default" and the other side into
"GND" on the terminal block as the picture is shown below.
• Connect power to the camera again. It takes around 30 seconds to boot the camera.
• Remove the wire and plug in the Ethernet cable after the camera finishes booting.
•Re-login the camera using the default IP (http://192.168.0.20) where both user name
and password are admin.
61