Planet RS-21 KLMR User Manual page 16

(2) Click one of IP cameras listed on the left side of IP Installer, and then the network
configuration of that IP Camera will be listed on the right side. If parameters change,
click on "Submit". Then, the network configuration will be changed. Just click "OK" to
reboot
(3) Please make sure the subnet of PC IP address and IP CAM IP address are the same.
IP CAM IP address: 192.168.0.20
PC IP address: 192.168.0.100
(4) Different Subnets:
IP CAM IP address: 192.168.0.20
PC IP address: 192.168.1.100
(5) To Change PC IP addresses:
Control Panel Network Connections Local Area Connection Properties Internet
Protocol (TCP/IP)
Please make sure your IP Camera and PC have the same Subnet. If not, please change
IP Camera IP subnet or PC IP subnet accordingly.
(6) A quick way to access remote monitoring is to left-click the mouse twice on a selected IP
camera listed on "Device list" of PLANET IP Installer. An IE browser will be opened.
Properties
16
Full HD Outdoor IR POE IP Camera
ICA-3250V