Log List; Sd Card - Planet RS-21 KLMR User Manual

Interval
Based on the
schedule
GPIO Output Setting
On Off Switch
Time Switch
Please connect to propriety relay box to reduce the risk of electric shock & damaged.

3.8.4 Log List

Sort by System Logs, Motion Detection Logs and I/O Logs. In addition, System Logs and I/O
Logs won't lose data due to power failure.

3.8.5 SD card

Playback
Please insert a n micro SD card before using it. Make sure t o push the micro SD card into
the slot completely.
For example, if you select "10 sec" here, once the motion is
detected and action is triggered, it cannot be triggered again
within 10 seconds.
When the option box is ticked, only during the selected
scheduled time the I/O is enabled. That is, for example, the
11th hour of Monday has not been colored in the scheduled
table, then no action will be triggered even the camera detects
input signal during 11:00~12:00 on Monday.
The GPIO I/O port output activates On/Off Switch, Slide Switch
or Pan/Tilt Module for use with relay box.
The camera triggers the external device and lasts for 10
seconds. You can turn off the alarm manually by clicking "off"
on the right bottom of the live video page.
The camera triggers the external device and lasts for certain of
time according to the interval setting, and the user is not
allowed to break off the alarm manually.
57
Full HD Outdoor IR POE IP Camera
ICA-3250V