Planet RS-21 KLMR User Manual page 41

For data security reason, the authentication and encryption assurances are added
when developing SNMPv3. The user has to give not only the security name (the same as
"community name" in v1 and v2c, or sometimes we call it "context name") but the password
in order to access the IP camera. Please set security name, authentication type,
authentication password, encryption type, encryption password of write and read
respectively. The password must be 8~64 bits in length.
Different from SNMPv1 and v2c, the user has to create an account when using SNMPv3.
In the account parameters, key- in the security name and password you set in the camera to
get access.
SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send messages to manager
instead of waiting passively for polling from the manager. Specify the trap event. When
those events happen, the camera will send the ring message to the Trap Address, which is
usually the manager's IP address. Trap Community means the community can receive the trap
message.
• Cold Start: The camera starts up or reboots.
• Setting changed: The SNMP setting is changed.
• Network Disconnected: The network connection is broken down. (The camera will send
trap messages after the network is connected again.)
• V3 Authentication Failed: A SNMPv3 user account tries to get authentication but failed.
(Due to incorrect password or community)
• SD Insert / Remove: A Micro SD card is inserted or removed.
Full HD Outdoor IR POE IP Camera
41
ICA-3250V