Get User Information
All the users in the network will be listed in the <User information> zone, as
"User: 4321." It indicates that one user's login username is "User", and password is "4321".
Get User Privacy
Click on <get user privacy> at the bottom of the page, and the Administrator can view each user's
privileges as "User: 1:1:0:1."
1:1:0:1= I/O access : Camera control : Talk : Listen (refer to the section Security)
Therefore, it denotes the user is granted privileges of I/O access, Camera control and Listen.
4.3.14.3
View Parameters
The View Parameters function can be found under this path: System> View Parameter.
Click on this item to view the entire system's parameter setting.
4.3.15 Factory Default
The factory default setting page is shown as below. Follow the instructions to reset the IP Camera to
factory default setting if needed.
- 54 -